-
Step 1: Match the performance grade to the actual use case — before you see a price
-
Step 2: Get the actual specification sheet — not the website listing
-
Step 3: Translate pattern repeat into actual yardage — not just square footage
-
Step 4: Build a TCO model — not a per-yard comparison
-
Step 5: Know where Kravet wins and where it doesn't
-
Step 6: Lock down lead time, dye lot, and minimums before the PO
-
Step 7: Inspect on delivery, not after installation
-
Common mistakes I still see
I'm the procurement manager at a 42-person interior design firm. I've managed our FF&E fabric budget (about $300,000 annually) for five years. In that time I've processed 200+ orders and negotiated with 60+ vendors. Every order goes through our cost tracking system.
When I first took this role in 2019, I assumed the lowest quoted price per yard was the right starting point for evaluating fabric orders. Three budget overruns later—one of them a $2,800 emergency reorder because I hadn't accounted for pattern repeat in the cut plan—I realized that in commercial textiles, the list price per yard is like the sticker price on a car. It's the beginning of the conversation, not the end of it.
This checklist is for anyone procuring commercial-grade textiles: Kravet commercial fabrics, contract carpets, performance upholstery, or any project where the spec sheet includes a Wyzenbeek or Martindale number. If you're ordering residential drapery from a retailer and nobody's asking for a flame certificate, you probably don't need this. The list is long because contract textiles are complicated. If your project isn't complicated, skip the list.
Step 1: Match the performance grade to the actual use case — before you see a price
Commercial projects come with technical floors that most people outside the industry don't think about: abrasion ratings, flame spread, colorfastness. Before I request a single quote, I pull the project's performance spec.
This is where Kravet makes sense. Their residential collections are beautiful, but if the project is a hotel lobby or a corporate lounge, I'm specifying from their contract line—higher abrasion counts, documented flame compliance, engineered for commercial cleaning. The pretty stuff from the standard catalog looks great in a showroom. It looks less great after a year of commercial use.
What does the spec actually need to say? Check the project's construction documents. If they reference NFPA 260 or NFPA 701, ask your Kravet rep which specific SKUs carry that certification. Don't assume the line carries it across the board.
Step 2: Get the actual specification sheet — not the website listing
Kravet's site gives you a nice overview. The spec sheet is the legally binding document, and it's what your cut plan depends on. You need: fiber content, width, pattern repeat, shrinkage data, and whether the specific collection (Kravet Meadowlark, for example) has batch variation across colorways.
I learned this the expensive way in 2021. I ordered based on the website's width listing for a pattern. When the roll arrived, the usable width was 54 inches, not the 58 the marketing page implied after selvedge. Our cut plan was off, and we paid rush fees to reorder 12 yards. The spec sheet would have shown the usable width. The website didn't.
Call the rep and ask one specific question: "What are the actual shipped width and pattern repeat dimensions for this SKU?" Then request a physical memo sample. The sample tells you things the photo can't.
Step 3: Translate pattern repeat into actual yardage — not just square footage
This is the quietest budget killer in commercial textile work. People calculate wall or seating area, divide by fabric width, and call it a day. They forget that a large vertical or horizontal repeat changes the arithmetic.
A commercial project with a half-drop repeat on a 24-inch vertical can generate 18-22% waste. A solid or small-scale texture might waste 8-10%. The difference on a mid-sized project is hundreds of yards. At $45-90 per yard for Kravet commercial upholstery, that's not rounding error.
My rule: for any pattern with a repeat over 12 inches, add 20% to your base calculation. For large repeats (over 24 inches), add 25%. If the project involves bedding ceremony events or hospitality use where matching sets need replacement over time, add another 10% for attic stock. You cannot reorder a discontinued colorway in year three.
Step 4: Build a TCO model — not a per-yard comparison
The upside of specifying Kravet is that the product is built for commercial life. The risk is that the project budget isn't sized for it. I compare at least three paths: Kravet contract, a mid-tier commercial alternative, and a budget option like glass fiber textile where the spec allows it. Glass fiber textile is dramatically cheaper upfront—often $8-15 per yard for basic weights—but it's a different product category entirely. You're evaluating it for the right reasons (fire performance, dimensional stability, budget) or you're making a mistake.
Here's the TCO framework I use:
- Material cost: Base price × required yardage (including waste factor).
- Freight: Roll freight is not free. For a typical upholstery order, budget 4-7% of material cost.
- Cut-and-sew / fabrication: If the project requires COM handling, the labor variance between a forgiving solid and a fragile glass-fiber or high-twist viscose is real.
- Longevity cycle: Kravet contract fabric might cost 40% more than a mid-tier alternative but last twice as long in a high-traffic area. The annualized cost can favor the higher-priced option by 15-20%. I've seen this calculation flip the decision at least a dozen times.
- Risk cost: What happens if the cheap option fails inspection or looks worn in year two? Replacement labor usually runs 2-3× the original material cost.
I keep an Excel template for this. Over the past five years, tracking 200+ orders, I've found that about 30% of our "budget overruns" came from life-cycle replacement costs we didn't model upfront—mostly on projects where we chose the cheaper fabric against the spec's intent. We now require a TCO table for any textile order over $5,000.
Step 5: Know where Kravet wins and where it doesn't
This is the part most procurement guides skip: an honest look at fit.
Kravet commercial fabrics make sense when:
- The project requires documented performance certification
- Design intent depends on the specific hand, color, or drape that Kravet delivers
- The client relationship and replacement cycle justify the premium
- You need a coordinated package (upholstery, drapery, trim, carpet) from one source
Look at alternatives when:
- The project is spec-driven but not design-driven (lower-cost contract lines work fine)
- You're outfitting a high-turnover space where the fabric will be replaced in 18 months regardless of quality
- The scope includes 15+ guest rooms where a 9x12 rug order alone can blow the textiles line—viscose rugs at that size run $600-1,200 retail, and a designer-grade Kravet carpet will run multiples of that. If the client won't see the difference in year three, the differentiator is cost, not craft.
I'm not saying avoid Kravet. I'm saying tell the client what they're paying for. "This is the right product for this application" is a stronger, more defensible position than "this is what the designer likes."
Step 6: Lock down lead time, dye lot, and minimums before the PO
Commercial textile lead times are not retail lead times. Standard Kravet residential patterns may ship from stock. Contract patterns with custom colorways can carry 6-8 week lead times and minimum yardage requirements. If the project schedule has a client walkthrough in six weeks and the fabric hasn't shipped yet, that's a red flag regardless of the quoted price.
Two questions I always ask before signing:
- "Is this SKU currently in stock, or is there a production lead time?"
- "What's the minimum order quantity for this colorway, and is there a dye-lot risk across the yardage I need?"
If the answer involves "dye lot risk," order the full requirement in one pass and retain attic stock. A reorder six months from now may arrive visibly different—and no amount of discount covers the cost of replacing a visibly mismatched panel.
Step 7: Inspect on delivery, not after installation
The last step is the one people skip. When the shipment arrives:
- Check the dye lot number on every roll against the order
- Measure usable width on one roll from each lot
- Do a visual inspection for weaving defects, shade bars, or finish inconsistencies
- Compare against the approved memo sample
If something's wrong, the clock starts immediately. Claims filed after the fabric is cut and sewn get much harder to win. I keep a simple receiving form—five checkpoints, initials, date—and the vendor's claim window is noted on it.
Common mistakes I still see
They warned me about skipping receiving inspection. I didn't listen, and a $300 roll with a shade bar went into a $4,200 drapery package. We ate the labor to redo it.
The other recurring mistake: treating glass fiber textile or low-cost viscose as a "like-for-like" substitute for contract-grade upholstery. They're not the same product, and they don't serve the same spec. Use them where they belong—cheap blackout lining, budget drapery interlining, non-critical area rugs—not as a shortcut past the performance spec.
Bottom line: the lowest price per yard is the wrong metric. The right metric is total cost across the useful life of the project. That calculation takes an extra hour on the front end. It has saved me roughly $18,000 annually in avoidable overruns and rework—about 6% of our textile budget.
